Guides

Electric Scooter Riding Tips For Beginners

If you’re reading this, you are likely interested in buying an electric scooter for the first time. Since the Electric Scooter has become one of the latest must-haves for teens and adults, we came up with a list of Electric Scooter Riding Tips For Beginners to help you get started. These tips will be helpful for any Electric Scooter riders, whether they are beginners or not.

Electric Scooter Riding Tips For Beginners:

  1. Do your research– Before spending any money on an electric scooter, make sure you do your research and find the right scooter for your needs. There are many different types and models available, so be sure to find one that is best suited for your riding style and experience level.
  1. Check your surroundings– Always be aware of your surroundings before riding an electric scooter. Make sure you are aware of any obstacles in your path and know where you are going. Remember, you are not only responsible for yourself, but for anyone else who may be around you.
  1. Wear a helmet – This should go without saying, but always wear a helmet when riding an electric scooter. Not only is it required by law in some states, but it can also save your life in the event of an accident.
  1. Follow the laws– Make sure you are familiar with the laws regarding electric scooters in your area and obey them. In some states, you may be required to have a driver’s license or wear a helmet.
  1. Be aware of your speed– It is easy to get carried away on an electric scooter and go too fast. Remember to stay aware of your speed and use common sense while riding.
  1. Use caution on hills– Riding an electric scooter up a hill can be a lot of fun, but use caution as it can be easy to lose control. If you are not comfortable riding up a hill, take it slow and practice on easier slopes first.
  1. Respect pedestrians– Always use caution when passing pedestrians and are sure to give them plenty of room. Remember, they may not be expecting an electric scooter rider to come speeding around the corner.
  1. Take breaks– Don’t try to ride your electric scooter for hours on end. Like any other type of exercise, take breaks often and drink plenty of water.
  1. Have fun!Riding an electric scooter is a lot of fun, but it’s important to remember to use caution while doing so. Be safe and have fun!

Tips For To Avoid Getting Stranded:

If your scooter runs out of battery while you are riding, you can avoid being stranded by following these tips:

If your scooter has a kickstand, put it down and push the scooter to a safe place away from traffic.

If your scooter does not have a kickstand, try to find something to lean the scooter against.

If you are unable to push or lean the scooter, walk it to the nearest outlet and plug it into recharge.

In general, electric scooters are a convenient way to get around town without having to deal with finding a parking space. However, before you take your scooter for a ride, be sure to read the safety instructions and practice the basic riding techniques. This will help you to feel more confident and safer while riding. Have fun!

Some Helpful Tips:

When not in use, always store your electric scooter in a dry place.

Never leave your electric scooter outside in the rain or snow, as this could damage it.

If you will be storing the scooter for several days, remove the battery and either recharge it or store it with a full charge.

Never store the scooter with the battery still attached. This can damage both the battery and the terminal.

If you are travelling with your scooter, be sure to pack it in a case or put it in the trunk of your car. This will help to keep it safe from harm.

How to Ride an Electric Scooter Safely?

1- Protect your trip and riding style by wearing the appropriate gear:

It is important to wear protective gear when riding an electric scooter, especially if you are a beginner. Wearing a helmet, gloves, and sturdy shoes can help protect you from falls and injuries. Make sure your clothing is also appropriate for the weather conditions and terrain. If you are riding in the dark, wear bright colors so that other drivers can see you.

Make a plan before you start your Trip:

Riding an electric scooter in traffic can be scary for a beginner. Before you begin riding, take the time to plan out your route and check that your batteries are fully charged. You should always carry spare batteries with you or be able to switch them out quickly in case you run into trouble.

Start slowly and build up your Speed:

When you are first starting out, it is important to take things slow. Build up your speed gradually as you become more comfortable with the scooter. This will help you stay safe while riding.

2- Become familiar with the controls on your Scooter:

Each electric scooter is different, so it is important to become familiar with the controls before taking it out for a ride. Know how to turn it on and off, accelerate, brake, and steer. Familiarizing yourself with the scooter’s quirks ahead of time can help keep you safe while riding.

Check Handlebar:

Check your handlebar before you start going on a ride. Make sure the left and right brake levers are in good working order, that each brake operates independently, and that the throttle is securely tightened to prevent it from coming loose when riding. Handlebars enable riders to steer their scooters, making them much easier to ride.

Check Folding Mechanism:

If your electric scooter is foldable, make sure that you can do so easily and safely. Practice folding and unfolding the scooter a few times before you take it out for a ride – this will help ensure that you are able to do so safely.

Check Brakes:

Know where your electric scooter’s brakes are, and how much pressure is required to engage them. If you are riding in the rain, make sure that the brakes can still grip properly. Also, if you ride an electric scooter with regenerative braking (where the braking system also charges the battery), make sure you are aware of how to use it.

Check Throttle:

Make sure that your throttle works properly – some throttles have an “S” curve which requires you to briefly click up or down before it stays in that position, so you can maintain a steady speed.

3- Before hopping on your Scooter, do the following pre-flight check:

Before going out for your first trip, run through a pre-flight check to ensure your scooter is in good working order.

Make sure the tires are in good condition and properly inflated

Check all lights, including brake lights, turn signals, and headlights (if your scooter has them)

Make sure the battery is fully charged

To ensure that all nuts, screws, and bolts are secure, tighten them up

Ensure that the folding mechanism is functioning properly

Test the brakes by riding the scooter in a safe place away from traffic.

Check scooter appears to be in good shape (no unusual noises, obvious damage, or anything unexpected)

For longer journeys, a pannier with space for all of your gear (pump, tire slime, multi-tool)

Check mobile phone: In the case of an emergency, you can use your smartphone to contact family or friends.

4- Kick off from the ground to launch your scooter

You can start riding your scooter by kicking off, stepping on the deck, and pressing the accelerator.

The motor on a scooter usually engages when the scooter reaches about 5 km/h; however, zero-start scooters do not require kicking off.

Be sure you have the kickstand up before you launch.

If this is your first time using the scooter, you may want to adopt a conventional stance. You have to put one foot in front of the other. This is called goofy stance if your dominant is in front.

Having your feet side-by-side may work for some people, but it will result in less stability, and you will find it harder to shift your weight to balance. If you ride this way, you will not be able to react as quickly in case of an emergency.

5- Rely on leaning at higher speeds and Turn by steering at lower speeds:

Riding an electric scooter is different from riding a bicycle, and it’s important to be aware of the best practices before you embark on your first ride.

Always turn by steering at lower speeds and lean into turns for higher speeds.

To steer, push your weight in the direction you want to move. Be careful not to lean too far forward or back, as this can cause you to lose balance.

If you want the scooter to move right, shift your weight and rotate the front of the deck (and handlebars) slightly to the left. If you want to move left, shift your weight and rotate your deck and handlebars slightly in the right direction.

For faster turns, you will need to lean into the turn. To do this, shift your weight towards the outside of the turn. This will cause the scooter to lean and turn more quickly.

6- When braking hard, shift your weight back and down:

When you brake hard, shift your weight back and down. This will cause the rear wheel to lift off the ground and reduce friction with the road. You may also need to lightly engage your front brakes while maintaining a firm grip on the handlebars. This practice is especially important if you are riding an electric scooter with regenerative braking, as it will help to recharge the battery.

Be aware of the scooter’s weight distribution.

Balance is key when riding an electric scooter. Electric scooters are heavy because they have a large battery, motor, and frame, so you will need to maintain a good balance throughout your ride. If you have trouble maintaining proper balance or speed control, consider shifting your weight to reduce strain on the scooter.

7- Lean forward when accelerating and lean back when decelerating:

When you want to accelerate, shift your weight towards the scooter’s front. This will cause the rear wheel to lift off the ground and push you forward faster.

When you want to decelerate and stop, shift your weight back towards the rear of the scooter. This will cause the front wheel to come off the ground and slow you down.

8- Use the throttle to accelerate, while positioning yourself for stability:

To accelerate, press the throttle on the handlebar. The further you press down, the more acceleration you will get.

Be sure to keep your weight in the center of the scooter for maximum stability. If you have trouble accelerating or maintaining balance, try leaning slightly forward or back until you find a position that works best for you.

Scoot to stop:

You also need to know about the scooter’s regenerative braking system. Regenerative brakes use electricity to recharge the battery, generated by slowing down. This means that your brake lights will only turn on if you travel above 20 km/h. To maintain steady speed or slow down, just lightly apply the brake.

You can also use the scooter to stop quickly by scooting backwards. This will cause the rear wheel to lock up and bring you to a quick stop. Be aware that this will also cause you to lose balance, so be prepared to hold on tight!

Advanced Electric Scooter Riding Techniques:

Before you venture out onto public roads during the learning process, you’ll want to know a few advanced techniques.

1- If you are riding with your hands off the handlebars, keep them near the controls:

Be sure to keep your hands within reach of the throttle and brake controls. This will enable you to react quickly in case of an emergency.

2- Keep both feet on the scooter at all times:

This will help you to maintain balance and control.

3- Use the hand brake to stop quickly:

If you need to stop quickly, use the hand brake. This will cause the rear wheel to lock up and bring you to a quick stop. Be aware that this will also cause you to lose balance, so be prepared to hold on tight!

Look Ahead to Avoid Obstacles:

When riding at full throttle, you will need to look ahead to react quickly. You may have noticed that it’s hard to see because your eyes are drawn downward by the wind. This is why scooter riders need to anticipate obstacles rather than just react. Looking down for even a second can be dangerous, and maneuvering around obstacles is much easier when you can anticipate them.

Surface Swells:

If you are riding on potholes, sidewalk cracks, speed bumps, railroad crossings, or bumpy roads with plenty of surface swells, you need to prepare yourself. Electric scooters can get tossed around quite a bit on these surfaces, so it’s important to hold on tight and keep your balance.

Rollover Obstacles Perpendicularly:

When you encounter an obstacle, the key is to maintain speed and roll over it perpendicular to its surface. For example, if you come upon a rock or piece of lumber, continue riding forward and roll over it at a 90-degree angle instead of coming to a stop and turning around. This will prevent the front wheel from getting caught in the obstacle and flipping you over.

Avoid Electric Shock:

Don’t use your scooter on wet or dirty surfaces, through water puddles, or mud. Water and dirt can conduct electricity from the ground to your body. Electric shock can result in serious injury, so be careful!

Maximize Range with These Tips

What are the best ways to maximize your scooter’s range? Following these tips will help you save as much energy as possible:

  1. Always kick start your scooter:

This is the best way to start your scooter. It’s also a good habit to get into so that you’re always prepared for an emergency.

  1. Avoid excessive braking:

Whenever possible, try to slow down by easing off the throttle rather than applying the brake. This will help conserve energy and extend your range.

  1. Turn off the headlights:

If you are stopped at an intersection, don’t idle with the lights on. Electric scooters are very quiet machines, so they won’t be heard by pedestrians or other vehicles.

  1. Parking brake:

Instead of turning your scooter off, engage the parking brake and kill the engine. This will help to conserve energy.

  1. Maintain a steady speed:

If you can maintain a consistent speed, you’ll use less energy and have a longer range. Electric scooters are more efficient when ridden at a steady pace.

  1. Avoid excessive idling:

If you’re not going to be using your scooter for a while, turn it off. Idling can use up valuable energy and reduce your range.

  1. Don’t accelerate unnecessarily:

Suppose you don’t need to speed up. So, don’t accelerate unnecessarily; it will quickly use up your energy reserves.

  1. Use the scooter for short distances:

The best way to conserve energy is to use your electric scooter for short distances. This will minimize the amount of time that the engine is running.

  1. Stay off wet and dirty surfaces:

As mentioned earlier, wet and dirty surfaces can cause electric shock. It’s best to avoid these conditions altogether to maximize your range.

  1. Minimize carrying weight:

The more weight you carry, the more energy you’ll use. Try to avoid carrying unnecessary items with you when you’re riding your scooter.

  1. Keep your top speed down:

The faster you’re going, the more energy your scooter is using. Always keep your top speed down until you are familiar with how much energy your scooter uses at various speeds.

  1. Avoid riding up hills:

Electric scooters are designed for maximum efficiency when used on flat ground. Riding an electric scooter hill climb will require lots of energy and reduce your range.

  1. Use the eco-mode:

Most scooters have an “eco” mode that reduces power to conserve energy when you’re riding at a constant speed.

  1. Inflate tires to proper pressure:

By maintaining proper tire inflation, your rolling resistance will be reduced. When your tire pressure is too low, your range will be reduced, and your risk of a flat tire will increase.

  1. Minimize turning:

Whenever possible, avoid turning the scooter. This will save energy that would otherwise be used to power the turning mechanism.

  1. Ride in warmer weather:

This tip is most effective the hotter it gets. Electric scooters use less energy in warmer temperatures. Riding your electric scooter when it’s hot will help reduce your energy consumption.

  1. Clean and lube your chain:

Keeping the chain on your electric scooter lubricated and clean will help ensure that you’re getting maximum efficiency out of your machine.

  1. Use the correct gear:

When riding up hills, it’s best to use lower gear to conserve energy. Likewise, when riding on level ground or downhill, you should use a higher gear to take advantage of the scooter’s momentum.

These tips will ensure that you ride your electric scooter safely and efficiently, thus maximizing the range!

Electric scooters can be a lot of fun, but they also require a certain level of skill and knowledge to operate safely. Be sure to practice safely and always wear protective gear when riding.

Have fun and stay safe! Happy Riding!

Electric Scooter Turning Tips:

  1. When turning, lean in the direction of the turn.
  2. Use your foot to help steer the scooter.
  3. Keep your arms and hands straight to maintain balance.
  4. Make smooth turns for the best results.
  5. Avoid excessive braking or accelerating when turning.
  6. Remember to use your brakes sparingly, as they can quickly reduce your range.
  7. Be cautious when turning on wet or dirty surfaces. Electric shocks can occur when the scooter is in contact with water or dirt.
  8. Always use common sense when turning your electric scooter. If something doesn’t feel right, stop and assess the situation before continuing.
  9. Electric scooters can turn very quickly, so always be aware of your surroundings when making a turn.

Electric Scooter Stopping Tips:

  1. Keep the scooter straight to prevent tipping over when coming to an abrupt stop.
  2. Use both brakes for maximum stopping power.
  3. Avoid braking too quickly.
  4. Electric scooters can stop quickly, so always be aware of your surroundings when applying the brakes.

Common Mistakes While Riding: 

Now that you know the basics of how to ride an electric scooter, there are some things you should avoid doing while riding. Below are some of the most common mistakes people make while riding an electric scooter:

  1. Not wearing a helmet– This is the most important safety precaution you can take when riding an electric scooter. A helmet can protect you from serious head injuries in the event of a fall or crash.
  1. Not wearing sunscreen– Electric scooters can be a lot of fun, but they can also be very dangerous if you’re not careful. Make sure to always wear sunscreen when riding an electric scooter, especially if you will be riding for an extended period of time. Riding in the sun can lead to serious skin problems if you’re not careful.
  1. Electric scooter surfing– Electric scooters are great ways to get around, but they are not meant to be ridden on water. Electric scooter surfing is extremely dangerous and should never be done.
  1. Riding in the dark– Electric scooters should never be ridden at night, as it is difficult to see objects and other vehicles in the dark.
  1. Not obeying traffic laws– Electric scooters should be treated like any other vehicle when riding in traffic. Make sure to obey all traffic laws and signals when riding in traffic.
  1. Riding while impaired– Electric scooters are not meant to be used while under the influence of drugs or alcohol. Making sudden sharp turns and other erratic movements is difficult when you’re intoxicated, which increases the chances of injury. Electric scooter riding should always be done completely sober.
  1. Deciding to ride an electric scooter without any prior experience– Electric scooters can be a lot of fun to ride, but they can also be dangerous if you don’t know what you’re doing. Make sure to practice riding in a safe area before venturing out into traffic.
  1. Pushing the throttle too hard – Electric scooters are equipped with throttle designs that require you to push the throttle all the way down before starting. Electric scooter riders often forget this, which can lead to accidents if they panic and hit the throttle too hard. Electric scooters should be started slowly by squeezing gently on the throttle until it starts moving. Electric scooter riders who want an extra thrill can then push the throttle all the way down to get up to speed.
  1. Pulling the brake lever too hard – Electric scooters have a separate brake lever from the throttle. Electric scooter riders who want to stop suddenly often pull on the brake lever too hard, which can cause the electric scooter to swerve out of control. Electric scooter riders should always squeeze gently on the brake lever when trying to stop suddenly.
  1. Turning the handlebars too far – Electric scooter riders often turn the handlebars too far when trying to make a sharp turn, which can cause the electric scooter to lose balance and fall. Electric scooter riders should only turn the handlebars as far as necessary to make the turn.
  1. Not looking behind before changing lanes– Electric scooters can travel up to 15 mph, so it’s important to always look behind you before changing lanes. This will help you avoid collisions with other vehicles.
  1. Not wearing a reflective vest– Electric scooter riders should always wear a reflective vest when riding at night or in low-light conditions. The vest will help make you more visible to other drivers.
  1. Not wearing safety gear – Electric scooter riders should always wear safety gear, such as gloves, long pants, and closed-toe shoes. This will help protect you from injuries in the event of a fall or crash.
  1. Not having a charged battery– Electric scooters are powered by batteries, which means that they will not work if the battery is low or dead. Electric scooter riders should always check the battery power before riding to make sure it is charged.
  2. Failing to follow assembly instructions– Electric scooters are shipped with an instruction manual outlining how they must be assembled before being used. Electric scooter riders who fail to assemble their electric scooters correctly can cause serious injury if they malfunction. Electric scooter riders should always read and follow the assembly instructions carefully.

After the Ride: 

1- Park Your Scooter: 

When you’re finished riding, be sure to park your scooter in a designated area. Electric scooters shouldn’t be parked in the same place as cars or bikes.

Electric scooters can cause major damage to vehicles, which is no fun for anyone involved. Electric scooters should also be parked in an area where they’re well ventilated, out of the pouring rain or baking sun.

2- Lock Your Scooter:

Once you arrive at your destination, you should secure your scooter so that when you return it will be there.

Sometimes, it is impossible to bring your scooter with you, even though it’s the safest option.

We recommend using only high-quality U-locks when locking your scooter in public places, such as the Kryptonite New York series. Although they are heavy and expensive – about 2 kgs – but necessary, they are worth it. Cheaper and lighter locks will not protect you.

Slip the U-lock through a permanent and secure locking point with no easy way to remove it without tools. A permanent handle for carrying, a frame that goes through/around, a mechanism that folds through.

The last step would be to give your scooter a quick wipe down (towel or paper towel) after a wet ride and then park it inside, so it can completely dry off before you ride it again.

Your scooter’s IP rating (water/dust resistance rating) is important, especially if it doesn’t have one.

Conclusion: 

It’s relatively easy to learn how to ride an electric scooter, but it takes experience to learn how to ride safely in traffic.

Before riding in mixed traffic, wear a helmet, practice, and gain confidence if you are a total beginner.

Our Last Tip? Ride Responsibly! As more and more cities look at the pros and cons of electric scooters, there has been talking about how they could impact traffic patterns with increasing use. Be sure not to do anything unsafe if this becomes a reality so that our roads stay safe for everyone who uses them every day.

“The more you ride, the better you’ll get. Be patient and enjoy your time on an electric scooter!”

Leave a Reply

Your email address will not be published.

Back to top button