How to Charge Electric Scooter Without Charger?

Looking for How to Charge Electric Scooter Without Charger? You’ve come to the right place!

Luckily, this guide will assist you with the way to charge an electric scooter battery. I am supplying you with tips and tricks on how you’ll charge your scooter’s battery eccentrically. To enable you to form your scooter road worthy and keep its capacity cell sound.

Methods For How to Charge Electric Scooter Without Charger-

Portable Car Jumper:

Portable jumpers are simple batteries that store more voltage than ordinary batteries. With the considerable measure of voltage that it’s, you’ll use to offer the charge that your scooter battery must prepare it to travel.

To endeavor to charge your scooter battery utilizing a flexible, portable jumper, follow the guidelines:

Step 1: Attach the Jumper to the Battery

The primary thing you would like to try is to access the battery by finding a scooter’s battery compartment. At that time, interface the two cables of the vehicle jumper to both of the facility cell terminals.

You would like to make sure that the red line is connected to the battery’s specific port and the dark one on the negative port.

At that time, countercheck the entire association with a guarantee that there are no leaks or breaks for the procedure to be proficient. Ensure that there are no different gadgets related to the jumper since it’d deplete the jumper rapidly and counteract the battery to be charged.

You can also check “8 Easiest Steps to fix an Electric Scooter

Step 2: Turn on the Jumper

Step 2nd is to modify the jumper on. This is often to trigger the progression of current from the jumper to the battery. This progression of current will, within the end, charge your battery of the scooter.

Step 3: Leave to Charge

Leave the attachments of the scooter for over 20 minutes for the battery to completely charge. Try not to detach the jumper from the battery before the 20 minutes is finished.

Such a disruption may harm your battery. It’d expose you to the risks of electrical shock or maybe electrical flames.

Step 4: Check the Battery Levels

You would now be ready to check the battery charge level. If that the battery isn’t yet completely charged, you’ll leave the connection flawless to enable the battery to urge more charge or until it’s 100% charged.

Step 5: Disconnect

When you achieve the charge level that you need, or the scooter battery is charged. You’d now be ready to close up the vehicle jumper and disconnect the cables from the battery.

Begin by withdrawing the dark cable from the battery’s negative port, trailed by joining the cable-related to the positive port. You’re presently allowed to check the ride and go.

You can also check “How to Lock an Electric scooter ”

Universal Power Adapter of Electric scooter


Use a Universal Power Adapter:

An all-inclusive power adaptor is an electronic appliance that will temporarily eliminate electrical charges. It’s additionally better than most different gadgets of its sort therein it’s perfect with however many devices as could reasonably be expected. It’s also a process on the way to charge an electric scooter without a charger. You will; subsequently, little question thinks that it’s fit your one among a sort circumstance. Follow the instructions below:

Step 1: Plug the facility Cable into the Adapter

The adaptor, as expressed, can oblige various sorts of gadgets. During this manner, you’ll make sure that one among the interfacing wires can accommodate your port in any event.

Find the specific one and interface it to your battery port. You fit it firmly to take care of a strategic distance from any leakages, which will render some loss of intensity.

Step 2: cut the facility

Continue to close up your scooter’s electrical plugs. Close up the radio, lights, and a few other scooter segments, which may draw control. This is often to hurry up the way toward charging and lessen the wastage of vitality.

Step 3: Leave to Charge

Leave the battery to charge for quite a while. The all-inclusive adaptor collects less voltage than its vehicle’s jumper partner.

Hence, you will not get to await a very while, a bit like the case with the vehicle jumper above. Don’t, along these lines, await the battery to charge before detaching completely.

Step 4: Disconnect

When the charge is drained, unplug the facility link and start the scooter.


Deionized water or Electrolyte.

Positive and negative connections of electric cables.

Voltmeter and Hydrometer to screen the charge.

Gloves and goggles for hands and eyes wellbeing.

Dry and Funky Spot

This second choice may be a stop-gap measure as it just causes you to explore a challenging circumstance. It doesn’t in the least provides a permanent or enduring account of your power issue.


As you’ll see, this accomplishment is often practiced. Anyway, the various alternatives are not all that dependable, particularly over the end of the day.

Regardless you would like to locate a changeless account of the difficulty to abstain from experiencing superfluous burdens.

That’s the way to charge an electric scooter without a charger and, therefore, the well-ordered procedure of utilizing a vehicle jumper to offer the charge to your scooter battery for a fast ride.

Make some extent to wear defensive apparatuses like elastic gloves and goggles to shield yourself from anything which will end up badly.

Once your scooter’s battery is fully charged, your scooter will be ready to be ready for long-distance drives with ease of operation.

Back to top button